Genant vertebral fracture grade calculator
Enter the three vertebral body heights, and optionally a reference height from the nearest normal vertebra, to get the percent height reduction and the Genant semiquantitative grade. The grade table and the common mimics are below.
Need the whole report too? Type a few findings and get it written ↓
A sample dictation is ready below. Press generate, or type your own findings and end with “otherwise normal” to have the rest written out. No signup.
100 free reports over 14 days. No card, nothing to install.
Start your free trial →Please leave out patient identifiers. Text is de-identified before the AI sees it and is not stored. Demo output is not for clinical use.
Genant grades
| Grade | Height reduction |
|---|---|
| Grade 0: normal | Less than about 20% height reduction |
| Grade 1: mild fracture | Approximately 20-25% height reduction |
| Grade 2: moderate fracture | Approximately 25-40% height reduction |
| Grade 3: severe fracture | More than 40% height reduction |
Caveats
- A visual method. Genant grading is semiquantitative: readers grade by eye against an expected height. Measured percentages approximate it and do not replace reading the image.
- Not every short vertebra is a fracture. Schmorl nodes, Scheuermann change, developmental short vertebral height, and degenerative remodelling can reduce height without a fracture.
- Choose the reference with care. Compare with the expected height of that vertebra: its own posterior height for a wedge or biconcave deformity, an adjacent normal vertebra for a crush deformity.
Related
Worked example
Case. A vertebral body measures 15 mm anteriorly, 21 mm in the middle and 24 mm posteriorly.
- The anterior height is the lowest, so the deformity is a wedge.
- Height reduction = (1 − 15 / 24) × 100 = 37.5%.
Result. 37.5% lies in the 25-40% band: Genant grade 2, moderate wedge fracture.
Related calculators
Frequently asked questions
How is a vertebral fracture graded with the Genant method?
The Genant semiquantitative method grades each vertebra from T4 to L4 by its reduction in anterior, middle or posterior height compared with the expected height: grade 0 normal, grade 1 mild (approximately 20-25%), grade 2 moderate (approximately 25-40%) and grade 3 severe (more than 40%). The lowest height also names the shape: wedge, biconcave or crush.
How do you calculate percent vertebral height loss?
Divide the lowest measured height of the vertebral body by the expected height, subtract from one and multiply by 100. The expected height is usually the posterior height of the same vertebra for a wedge or biconcave deformity, or the height of an adjacent normal vertebra for a crush deformity.
Is every reduction in vertebral height a fracture?
No. Schmorl nodes, Scheuermann change, developmental short vertebral height and degenerative remodelling can all reduce height without a fracture. Genant grading is a visual method applied by an experienced reader; the measured percentage supports that reading rather than replacing it.
MyRadAgent’s radiology AI drafts the full report and applies this guideline automatically, with the category and follow-up in the impression. Free trial runs in the browser: 100 reports over 14 days, no card, no IT ticket.
Try it on a report → or try it here first — no signup ↑BI-RADS, TI-RADS, LI-RADS, PI-RADS, O-RADS, Lung-RADS, CAD-RADS, NI-RADS and ACR are registered trademarks of the American College of Radiology. They are used here only to identify the published systems these tools implement; MyRadAgent is not affiliated with, sponsored by or endorsed by the ACR.